2025

December

⏳ Timeline

  • Make viewing timeline photos navigable with forward/back buttons

🧑‍🏫 Tutorials

  • Re-arranged by product and added the Dashboard Demo Tutorial video

🏢 BIM

  • Changed the upload button in the Autodesk Forge UI

  • A user can upload a model directly from his/her ACC account or update the model whenever there are changes to the BIM. This requires one to be connected to Autodesk using our connector and the Evercam app on Autodesk.

  • Only one ACC account can be used per project.

Smart Search

  • Heatmap deployed

    • Opacity controls added

    • Query added to the image UI.

🚁 Drone

  • Moved the 'Export as GIF' button to the bottom of the right sidebar.

    • Added cubic support for aerial shots

      • This removes the blurry point where the 360 image was taken from

    • Added the Mark-up tool to cubic aerial shots

    • Adding Navigation arrows for aerial shots so users can go to the next aerial shot right away

🖍️ Drawings

  • Reduced loading time from 9 seconds to 200 milliseconds

  • Ability to rename drawings deployed

    • There is a maximum of 60 characters per drawing name.

🚶‍♂️ 360

  • Deployed 360 images light (💡 button at the lower right) -should be enabled for all walks within the month

    • This brightens up the image so users can see a bit more detail compared to the original image.

November

➕ Sharing

  • We added the ability to export the list of users in the Project Settings page for Project Owners.

🚎 Gate Report

  • Added vehicle type sorting

🤖 AI Disclaimer

  • "Data is based on automated visual analysis and may contain omissions or misclassifications."

  • Added to creation dialogs and to PDF & CSV, JPG exports for Object Detection, PPE, Smart Search, and Gate Report.

⛑️ PPE

  • We now remove detections older than 7 days for GDPR compliance.

⛈️ Weather

  • Weather forecast is now up to 7 days in the future.

🖍️ Drawings module

  • We deployed the Drawings module, which can be found in the left-side menu. The Drawings module allows you to upload, geolocate and overlay site drawings directly onto a 2D satellite map so you can store and access them directly on the dashboard and Capture App.

🏤 Forge BIM Viewer

  • We deployed the “Upload BIM” button. Users can now upload a model aside from updating the current model using Autodesk Construction Cloud.

📧 Automations

  • We’ve improved the Progress Photo and Compare emails.

  • The Compare emails include an AI description of what has changed based on the before & after images.

📊 Timeline

  • Deployed support for projects without cameras: when opening Timeline, it will default to 360/Drone, whichever the project has.

October

😀 New UI for 360 Gallery

  • We’ve included a timeline bar at the top for easier navigation over time. We’ve also included information on who uploaded the walks or images, and we are displaying uploaded images through the Capture app in the gallery.

🪟 360 Widgets

  • Users can now create widgets for 360 views or specific walks that can be shared with non-Evercam users or on a public website, a Dashboard, etc.

September

🛄 Media Hub

  • moved filters to the Right side panel

🔢 Automations

  • Improved creation dialog for Automations

🔎 Smart Search

  • Revised graph implementation

  • Improved area query display (show thumbnail of selected area)

📚 Projects

  • Improved Project Settings > Members camera filtering (allowing multi-select)

🧠 Brain Tool/Object Detection

  • Added the ability to EXPORT the images with the bounding boxes

🏢 Company Page

  • Moved Kits to their own tab and improved UI/UX

  • Improved the active users display, filtering, etc

  • Removed the Cameras table, moved Projects to their own tab

  • Add kits count to the stats

  • Improved the events tab

August

🔍 Smart Search

We’ve deployed our Smart Search feature. This is available for projects upon request.

🦺 PPE Detection

We’ve deployed our PPE detection feature. This is only available to projects with dedicated PPE cameras. Read more about it here.

⬆️ Queue Assets system

A processing queue notification will be displayed beside the Help button when uploading files through BIM, Drone or 360 view.

↩️ Automations

Automations are now project-based. To view all the automations created for a project, go into the specific project, click on the Automations tab, and users will see all the automations created by any user for the project.

  • Compare GIFs can now be automated.

🗺️ 360 Mini-Map

Measuring can now be done within the Mini-map.

🎞️ 360 Gallery

We added the 360 Gallery view upon entering 360 in any project. View all the available walkthroughs in one screen and pick the walk you want to check. Filters available.

July

☀️Weather Report - UV Index

We've included UV index as part of the information displayed in the Weather Report page.

UV index is monitored especially during the summer to ensure proper & safe working conditions. The index ranges from 1 (low) to 11+ (extreme). Skin damage occurs when the UV index 3 and above.

June

➕ Add Logos to Compares and BIM Compares

Users can now add Logos to Compares and BIM Compares, similar to Time-Lapses.

🔎Zoom in Compares

Users can now zoom in while viewing comparisons to see more details.

✅ System Check

We’ve added a System Check under the Help section to assist users to check if their hardware is compatible with Evercam’s requirements for smooth performance.

🛰️ Drone and 360

Users can now download the media from Drone and 360.

✏️ Project Settings tab

  • Company Admins can now add a temporary thumbnail photo to cameras that are waiting for activation through the Project Settings tab.

  • Company Admins can now connect their weather device to the Evercam Platform for more localised weather data.

  • Company Admins can now easily Restrict Access to the project camera(s) in case of emergency.

    Only available for Project Owners.

May

📸 Cameras List

We added a separation for cameras that are “Waiting for Activation” in the Cameras List.

  • Camera thumbnails/previews in the Project Home page are also rearranged based on status. So active cameras will be seen first followed by non-active cameras.

🌦️ Weather Tool

Added back & forward arrows for the date selector at the sides for easier navigation.

⛅Weather Units

When selecting “Imperial” as a preference for the Unit System, temperature units will default to Fahrenheit.

April

📷 Cameras List

For projects with multiple cameras, we’ve organised the list and separated active cameras from decommissioned cameras for better viewing.

⏳ Time-Lapse Creator

Timestamp removal feature has been improved.

⭕ 360

Face Blurring has been expanded to whole person blurring.

🔍 Object Detection

An export feature was added to Object detection (found under the Recordings tab)

▶️ Media Player

We added tool tips/names upon hover for the buttons in the Media player.

First frame and Last frame buttons (double arrows) function and name have changed; these buttons can be seen in Recordings and Time-Lapse tabs.

  • First Frame/ Last Frame buttons have been removed from the Timeline tab.

    These buttons were used to jump back/forward by 10 frames. Now it goes to the first frame and the last frame.

March

⭕ 360

Face Blurring is now available.

February

⬆️ Self-upload for 360

You can now upload 360 videos (.INSV files only) through the Dashboard.

🪓 Split Shares Table in the Camera Sharing Tab

Share Requests have been separated from Accepted Shares for easier monitoring of pending requests.

📵 No Local Clip Exports for Decommissioned Cameras

Local Clip recordings are not allowed for decommissioned cams since they're generated from the edge device (kit) and that is offline. Cloud recoding clips export is still available.

🌦️ Weather Reports

We introduced a new page on the left-side navigation panel called Weather Reports. This page lists the historical weather data statistics for the project location in a table format for easier analysis. It also includes an Export function.

January

📂 Media Hub

We’ve deployed a new UI for the Media Hub which showcases the action buttons such as Filters and Upload at the top bar instead of the right side. Information about each media file can also be easily seen within the media card.

📺 New Widgets System

We’ve updated our Widgets system under one tab. Simply “Add Widget” to create a new one. Choose among Live View, Recordings, BIM Compare or Video Wall then adjust the settings to your preference. Don’t forget to click save. With this new system, a camera does not have to be made Public for the widget to work but its use will be restricted to a specific URL. This applies to Live View, Recordings, BIM Compare and Video Wall.

A camera doesn't have to be public to be used in a widget.

✏️ Edit Tool is now the Mark-Up Tool

We’ve renamed the Edit Tool to the Mark-up Tool. The reason for the name change is that the feature only allows a user to add over the actual camera image rather than change or manipulate it. We’ve also updated the icon so look out for the pen tip instead of the pencil. 😀